|
| |
THE LINK Telephone Interface To RTS and Clear-Com Intercom
|
| |
 |
| |
The Telos Link solves the problem of interconnecting production intercom systems with dial-up telephone lines. Anyone with access to a telephone, even a cellular phone, can instantly and automatically be connected with your intercom. Digital auto-nulling hybrids on both the telephone and intercom audio paths allows connections to be made without the usual gain and feedback problems, while maintaining natural, full-duplex operation. The result is significantly improved communication capability.
- An interface for RTS, ClearCom and other two-wire intercom systems is built in so that you can connect the Link to your intercom system simply as if it were another station. A front panel knob selects intercom channels.
- A "wet" single-channel operation option is selectable from the front panel. In this mode, the Link provides power to one or two belt packs and functions as a stand-alone intercom system.
- An auto-answer/auto-disconnect function is built in.
- A function to alert listeners that a call is ringing in is standard. This is provided via the 20kHz "call light" signaling function, if available in your intercom system, or by audible tone signaling.
- Monitor output is provided to hear the communications from the phone line.
- A loop-through connection is provided for a phone set.
- Link is fully remotable to allow incorporation into sophisticated systems.
Related Documents:
Call for price
keywords: rent rental rentals hire lease telex "The Link" teleos teloss tellos tellus tellose telouse teleous
|
|
| |
printer-friendly version of this page |