|
| |
120A 1x4 Audio Distribution Amplifier
|
| |
 |
| |
The Model 120A is a high performance audio distribution amplifier with a single high impedance input and four low impedance outputs, all electronically servo-balanced. The 120A's transformerless circuits are designed for wide, flat frequency response free from ringing or overshoot, making it ideal for distribution of SMPTE time code as well as audio. Each output has its own amplifier and level control for maximum versatility and isolation. The sturdy steel chassis may be used stand-alone or rackmounted, singly or in pairs.
- Frequency Response - 5Hz - 100 kHz (+0, -0.5dB)
- Dynamic Range 94 dB
- Hum and Noise Better than -90 dBm at unity gain
- THD 0.002% @ +4dBm, 0.005% @ +20dBm
- IMD 0.002% @ +10dBm
- Channel Isolation > 70dB
- Slew Rate 13 V/usec
- INPUT:
- Connector XLR 3-pin Female
- Type Transformerless, differential servo balanced
- Impedance 100k ohms balanced
- Maximum Level +25 dBm
- CMRR (typical) > 45 dB
- OUTPUT:
- Connector XLR 3-pin Male
- Impedance 65 ohms
- Maximum Level +25dBm into 600 ohms balanced, +21dBm unbalanced
- Output Gain Range ±15 dB
- OTHER SPECIFICATIONS:
- Power Requirements 100, 120, 220, OR 240 VAC, 50-60Hz (specify voltage)
- Dimensions 1.75"H x 8.25"W x 7.25" D (44.5mm x 209.5mm x 184.2mm)
- Net Weight 3.5 lbs (1.6 kg)
Related Documents:
Call for price
keywords: rent rental rentals hire lease sound audioda
|
|
| |
printer-friendly version of this page |